ORO - ORO E controllers : technical specifications (cod. P930114 00001)

Power supply 230Vac10% - 50Hz Motor 2800min -1 Absorbed power 240 W Capacitor 6.3 µF Max. pressure 0.9 A Pump capacity 0.6 ÷ 0.9 L/min Pushing force1500 N Towing force 1250 N Opening time (working stroke) 20s, 27 s (Oro E) Closing time (workig stroke) 20 s, 27 s (Oro E) Forza di trazione 1250 N Time of lock Hydraulic lock on closing (Oro E electric lock on closing /opening) Max leaf length 1.8 m (Oro 2.5 m) Max leaf weight 1800 N (Oro 2000N) Working stroke 250 mm Impact reaction Hydraulic clutch Manual manoeuvre Release key Thermal protection 120 °C Degree of protection IP 55 Controller weight 53 N (~ 5,3 Kg) Oil Idrolux

Characteristics:
. In all versions of the BFT Oro series, the crush-proof safety mechanism consists of two valves that can be adjusted with extreme precision.
. Manual opening in case of emergency is very easy, simply by pushing the leaf after releasing the operators using the special key supply or blocking the electric lock.

Provisions for installation

Performance
MOD.	Type	Type of lock	Max leaf length (m)	Closing or openingtime (sec)	Max leaf weight
ORO	(cod. P935059 00001)	Hydraulic lock on closing	20	1.8	180
ORO E	(cod. P935058 00001)	Electric lock	27	2.5	200

SALES PACKAGE

OROKIT (cod. R935210 00004)

This kit includes all the accessories needed to carry out installation: n° 1 control unit n° 1 double-channel transmitter n° 1 single-channel receiver n° 1 key selector

Installation measurements versione ORO - ORO E

NOTES: The vaues highlighted indicate the optimum configuration needed to obtain leaf movement at constant speed. When the "a" and "b" dimensions values are different, the leaf does not move at a constant speed. The values expressed in degrees represent the leaf opening degrees are determined in terms of the chosen "a" and "b" values.

ALCOR control panel : tecnical specifications (cod. D113030)
Power supply	230 V +- 10% 50-60 Hz single-phase
Max motor load	500 W
Power supply for accessories	24 Vac - 200 mA max.
Panel consumption	100 mA
Environmental conditions	-20°C to +55°C
Degree of protection	IP 55

Features

. 4 - step function logic (2 optional steps)

. Control impulse which can be excluded in the opening phase

. Photocells which can be activated in both directions or excluded in the opening phase

. 2nd leaf delay which can be set from 1 to 30 sec . Automatic closing time which can be set from 1 to 60 sec or excluded . Operation time which can be set from 1 to 90 sec . Self-diagnosing LEDs . Single or double-channel receiver board insertion connector

£675 Including VAT and Delivery

Automatic Gate Kits

Sliding Gate Kits
Home